Friday 18 January 2013

Peavey T-40 and T-60 Cases. . . . .

Happy New Year.

Sorry for the delay on this - been a bit busy! :)

More interesting stuff from Chip Todd

This one is all about the cases that came with the T-40 and T-60.















 


















 The official first cases were the Vac formed ones, with the brown interior and 
then later came the moulded cases.
The images above show one of the collection and the later moulded case, with
four catches.
Throughout the production run of both the basses and guitars, there were changes 
in the cases.  In the collection, I have one of each, plus an odd one!
 More questions to Chip. . . . .

I have a Fender type case, with the Olive coloured interior, the square Peavey
cases with the brown interior, the Peavey shaped cases with 3 clips and the last
of the series with 4 clips. That covers them all, as for as I know.
I also have an older Square case, which from the outside looks the same as the
others but this has a deep blue interior. I have never seen another one.
Any ideas? Looks factory made!


The original cases were vacuum-formed and we had quality problems with the 
vendor. 
They also rushed their shipments enough that the glue holding the velour cloth 
hadn’t had enough time to out-gas fully before we were putting guitars in the 
cases, thereby ruining the finish on lots of guitars. 
The aluminum edging wasn’t crimped properly on many cases, so we introduced 
the blow-molded cases to the market. 
We never authorized the other color than the bronze.  
I’m sure that the shipping of a case with the blue interior was a mistake.


No T-series instruments were sold without cases. 
The cases kept us from having to insure the shipped instruments.  
The first type cases were rectangular vacuum-formed cases with suitcase 
handles and aluminum valances around the mating edges. 
Those cases didn't work out well due to delivery, quality, and sturdiness. 
Hartley and I visited a blow-molding vendor and that convinced us to switch 
to blow-molding. 
I designed the cases, (guitar and bass), which had handles that were integral 
with the body of the case and were thicker and without the vellure lining.
The cases were almost indestructible; we pitched one out of the back of a 
truck driving about 80 mph and the guitar suffered no damage. 
The case held together, but had abrasions and dented corners. 
The latches held fast, but we added another latch to the bigger end of the cases.  
The bass and guitar cases were alike, differing only in the length. 
We operated on the JIT system, (just in time), so we wouldn't have to keep a 
large quantity on hand. 
This required a lot of faith in the vendor so that they didn't fail to have cases to 
us as we needed them.
That's about all I can tell you about the cases.To my knowledge, we never had to 

hold up production for want of cases, at least, as long as I was there.






 









I  also asked Chip about the Fender type cases but for some reason that doesn't
seem to be part of the history of the cases, as according to Chip, from memory,
it went from the type shown above, with an 8M bass, to the moulded ones.
I have seen quite a lot of them and as I said at the start, I also have one but I 
am still not sure how they came about.
Mine was with a very early bass and all the others I have see are, as well.






Part II on the cases, next time.

Cheers. :) 


Edit:
No matter what I do - I can't seem to remove the white background on
Chip's answers - sorry if it's a bit hard on the eye! :(

:) 

9 comments:

Z29r said...

I just picked up an early T-40 and it has the fender style case with a blue liner. Case case as you have photo of here. I thought it wasn't original, but now...Maybe it is?

Flat Eric said...

Hi. :) Not sure about your case.
If it is a Fender style and has an Olive Green interior, as in the pictures here, I have seen a lot with that case. The Blue I was refering to was the original Peavey, vac formed case, which I have only ever seen in the Golden Brown, apart from one I have, which is Blue.
Chip didn't know how that was possible - I am going to put up some shots with the Blue interior, to illustrate.
Cheers. :)

Unknown said...

I recently picked up a 1982 Peavey T-45 from the original owners brother. He claimed the case was the factory case that the bass shipped in. It is the Fender style with dark blue interior, otherwise identical to the interior of the above pictured Fender style case.

Unknown said...

I recently picked up a 1982 Peavey T-45 from the original owners brother. He claimed the case was the factory case that the bass shipped in. It is the Fender style with dark blue interior, otherwise identical to the interior of the above pictured Fender style case.

Unknown said...

I recently picked up a 1982 Peavey T-45 from the original owners brother. He claimed the case was the factory case that the bass shipped in. It is the Fender style with dark blue interior, otherwise identical to the interior of the above pictured Fender style case.

Flat Eric said...

Brian, Hi. If it's a Fender style case, as you can see from the comment above, it's happened before - someone else had a blue interior.
The Olive Green is not uncommon - I have several like that. Maybe the shop put it in that case? Chip Todd told me that all instruments were shipped in a case, back in the day.I have listed all the ones that I know of. Do you like the T-45? :)

Franz said...

I got a T60 from 79 and bought a black case like in the first picture. It's all original but the latches are pretty rusty. Any idea what's the best to get them clean?(It's still on the surface.

Got a T40 from 81 in a great condition and bought a case today. The bronze interior is gone but the rest is very clean. It is a brown mold case with 4 latches. Do you know when they used the brown ones and when the black ones?
I'm looking for the bronze interior and i think someone mentioned a source where to get thesame color on the T60mafia.
If you know where to get it, pleae message me.
I also like to know what size the black pickguard screws are.
With all the improvements in all those years, those rust rather quickly.
I haven't seen a single guitar where those aren't rusty.

I'm glad they changed the pickup covers later cause the holes directly on the corners like on my earlier T60 break a lot. I can't find a replacement for them s i guess i have to make them myself.

What kind of plastic was used for the cases and what do you use to keep the nice and black?

Unknown said...

From info I found, the "pea soup" green interior fender style hard cases were used as a stop gap when Peavey discontinued the rectagular molded plastic case and introduced the more modern plastic case with the molded handle as most examples have. Peavey stopped the rectangular cases (and ran out) before the new style molded handle plastic cases were ready. In a pinch, Peavey used the fender style case with the "pea soup" green interior. Not sure if that's true, but it make sense to me.

Flat Eric said...

Hi. I have a few of those cases you mention, all with Peavey's in, all the same. : )